Line Material Rank Two Scalar Sampler

Compute a scalar property of a RankTwoTensor

Description

The postprocessor LineMaterialRankTwoScalarSampler is used to output common scalar quantities computed from Rank-2 tensors along a user-defined line in the mesh. The postprocessor computes the same set of scalar quantities as the AuxKernel RankTwoScalarAux; for a full list of the available scalar quantities refer to the RankTwoScalarAux page.

The user must supply the start and end points of the line along which the Rank-2 tensor scalar quantity should be tracked. Often this class is used to track stress or strain along an exterior or interior edge of the mesh.

Example Input File Syntax

[./vonmises]
  type = LineMaterialRankTwoScalarSampler
  start = '0.1667 0.4 0.45'
  end = '0.8333 0.6 0.55'
  property = stress
  scalar_type = VonMisesStress
  sort_by = id
[../]
(modules/tensor_mechanics/test/tests/line_material_rank_two_sampler/rank_two_scalar_sampler.i)

Input Parameters

  • startThe beginning of the line

    C++ Type:libMesh::Point

    Options:

    Description:The beginning of the line

  • propertyName of the material property to be output along a line

    C++ Type:std::vector

    Options:

    Description:Name of the material property to be output along a line

  • endThe end of the line

    C++ Type:libMesh::Point

    Options:

    Description:The end of the line

  • sort_byWhat to sort the samples by

    C++ Type:MooseEnum

    Options:x y z id

    Description:What to sort the samples by

Required Parameters

  • scalar_typeA scalar to ouput

    C++ Type:MooseEnum

    Options:VonMisesStress EffectiveStrain Hydrostatic L2norm MaxPrincipal MidPrincipal MinPrincipal VolumetricStrain FirstInvariant SecondInvariant ThirdInvariant AxialStress HoopStress RadialStress TriaxialityStress Direction

    Description:A scalar to ouput

  • direction0 0 1Direction vector

    Default:0 0 1

    C++ Type:libMesh::Point

    Options:

    Description:Direction vector

  • _is_broadcastTrue

    Default:True

    C++ Type:bool

    Options:

  • contains_complete_historyFalseSet this flag to indicate that the values in all vectors declared by this VPP represent a time history (e.g. with each invocation, new values are added and old values are never removed). This changes the output so that only a single file is output and updated with each invocation

    Default:False

    C++ Type:bool

    Options:

    Description:Set this flag to indicate that the values in all vectors declared by this VPP represent a time history (e.g. with each invocation, new values are added and old values are never removed). This changes the output so that only a single file is output and updated with each invocation

  • point10 0 0Start point for axis used to calculate some cylinderical material tensor quantities

    Default:0 0 0

    C++ Type:libMesh::Point

    Options:

    Description:Start point for axis used to calculate some cylinderical material tensor quantities

  • point20 1 0End point for axis used to calculate some material tensor quantities

    Default:0 1 0

    C++ Type:libMesh::Point

    Options:

    Description:End point for axis used to calculate some material tensor quantities

  • execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.

    Default:TIMESTEP_END

    C++ Type:ExecFlagEnum

    Options:NONE INITIAL LINEAR NONLINEAR TIMESTEP_END TIMESTEP_BEGIN FINAL CUSTOM

    Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.

  • blockThe list of block ids (SubdomainID) that this object will be applied

    C++ Type:std::vector

    Options:

    Description:The list of block ids (SubdomainID) that this object will be applied

Optional Parameters

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Options:

    Description:Set the enabled status of the MooseObject.

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Options:

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

  • outputsVector of output names were you would like to restrict the output of variables(s) associated with this object

    C++ Type:std::vector

    Options:

    Description:Vector of output names were you would like to restrict the output of variables(s) associated with this object

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector

    Options:

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

    Default:False

    C++ Type:bool

    Options:

    Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

  • force_preauxFalseForces the GeneralUserObject to be executed in PREAUX

    Default:False

    C++ Type:bool

    Options:

    Description:Forces the GeneralUserObject to be executed in PREAUX

Advanced Parameters

Input Files