PorousFlowCapillaryPressureConst

Constant capillary pressure

This UserObject provides a constant capillary pressure (1) This formulation is useful for testing purposes.

Input Parameters

  • pc0Constant capillary pressure (Pa). Default is 0

    Default:0

    C++ Type:double

    Options:

    Description:Constant capillary pressure (Pa). Default is 0

  • pc_max1e+09Maximum capillary pressure (Pa). Must be > 0. Default is 1e9

    Default:1e+09

    C++ Type:double

    Options:

    Description:Maximum capillary pressure (Pa). Must be > 0. Default is 1e9

  • sat_lr0Liquid residual saturation. Must be between 0 and 1. Default is 0

    Default:0

    C++ Type:double

    Options:

    Description:Liquid residual saturation. Must be between 0 and 1. Default is 0

  • log_extensionTrueUse a logarithmic extension for low saturation to avoid capillary pressure going to infinity. Default is true. Set to false if your capillary pressure depends on spatially-dependent variables other than saturation, as the log-extension C++ code for this case has yet to be implemented

    Default:True

    C++ Type:bool

    Options:

    Description:Use a logarithmic extension for low saturation to avoid capillary pressure going to infinity. Default is true. Set to false if your capillary pressure depends on spatially-dependent variables other than saturation, as the log-extension C++ code for this case has yet to be implemented

  • blockThe list of block ids (SubdomainID) that this object will be applied

    C++ Type:std::vector

    Options:

    Description:The list of block ids (SubdomainID) that this object will be applied

Optional Parameters

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Options:

    Description:Set the enabled status of the MooseObject.

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Options:

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector

    Options:

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

    Default:False

    C++ Type:bool

    Options:

    Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

  • seed0The seed for the master random number generator

    Default:0

    C++ Type:unsigned int

    Options:

    Description:The seed for the master random number generator

  • implicitTrueDetermines whether this object is calculated using an implicit or explicit form

    Default:True

    C++ Type:bool

    Options:

    Description:Determines whether this object is calculated using an implicit or explicit form

Advanced Parameters

Input Files